Laravel по-русски

VasyaPupkin

Сообщений: 19

Не получается подключится к homestead по ssh

установил homestead. создал ключи для ssh, поместил их в папку ~/.ssh/
В Homestead.yaml пути до ключей корректные.
В браузере homestead.app сайт открывает.

Но если зайти через Putty, пишу хост vagrant@127.0.0.1 , порт 2222, тогда пишет:

Using username "vagrant".
vagrant@127.0.0.1's password:
Access denied
vagrant@127.0.0.1's password:

Почему он просит пароль если авторизация должна быть по ключу?

Во что выдает консоль при выполнении команды homestead up

Microsoft Windows [Version 6.1.7601]
(c) Корпорация Майкрософт (Microsoft Corp.), 2009. Все права защищены.


C:\Users\Unbreakable>homestead up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'laravel/homestead'...
←[K==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'laravel/homestead' is up to date...
==> default: Setting the name of the VM: homestead
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: hostonly
==> default: Forwarding ports...
    default: 80 (guest) => 8000 (host) (adapter 1)
    default: 443 (guest) => 44300 (host) (adapter 1)
    default: 3306 (guest) => 33060 (host) (adapter 1)
    default: 5432 (guest) => 54320 (host) (adapter 1)
    default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: Warning: Remote connection disconnect. Retrying...
    default:
    default: Vagrant insecure key detected. Vagrant will automatically replace
    default: this with a newly generated keypair for better security.
    default:
    default: Inserting generated public key within guest...
    default: Removing insecure key from the guest if it's present...
    default: Key inserted! Disconnecting and reconnecting using new SSH key...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
    default: The guest additions on this VM do not match the installed version o
f
    default: VirtualBox! In most cases this is fine, but in rare cases it can
    default: prevent things such as shared folders from working properly. If you
 see
    default: shared folder errors, please make sure the guest additions within t
he
    default: virtual machine match the version of VirtualBox you have installed
on
    default: your host and reload your VM.
    default:
    default: Guest Additions Version: 5.0.4
    default: VirtualBox Version: 5.1
==> default: Setting hostname...
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
    default: /vagrant => C:/Users/Unbreakable/AppData/Roaming/Composer/vendor/la
ravel/homestead
    default: /home/vagrant/Code => C:/Users/Unbreakable/Code
==> default: Running provisioner: file...
==> default: Running provisioner: shell...
    default: Running: inline script
==> default: grep: unrecognized option '---- BEGIN SSH2 PUBLIC KEY ----
==> default: Comment: "rsa-key-20161210"
==> default: AAAAB3NzaC1yc2EAAAABJQAAAgEApGtiFTeR7gu8htc13X0t1Ll1Ca5gVK6CWW2k
==> default: rodjChuNBhotZoLeENkfcRKi6yKWWvG69vtAPd32uR9UdKyZHfiAJtNUBTQCU/UL
==> default: 5nVSSkoxkocrE8G4p0rsY/hKjOv4aalFdkyieg/w8UWAj8ZRpu54Utta0pZY7BEO
==> default: C3/hUksIXxpbfNRCrvPKUNNbunO+b/5Mqe4rRzxSpwWW6FXd7B+sqP3Y/Fqs6ZDn
==> default: Dp7I79jd2hfmbzn0vP21Ha8RxMBn02N/EB4C8y4udXUV0hsoprJFcdV35J18tCmj
==> default: 3RB6mxznKSvck87R7NqYHdt8S2Kw4EJJC7UKi6kjG/OqQvuDX1Yg5z4jLzDrOnuV
==> default: usb+CM7XOXRveNEbt7Jxb6J0dzKL23V9NODyQpwgJwSDVY00iGsb3T69Sh3Dt7Xy
==> default: wJ9SpNFOol9aDLQ7h3r7OiQ5fa1Ohcfud4Rib3ogQXDQuhhHtwjIBLKIPuutBjzY
==> default: S/Un3/sf2VrzC3IIP179aO2TQ+Qj08RedpVc+WiCWhGQ5gDewnlj/ha2vv3tYlpG
==> default: dNso6oRx/e3ByUNxvzkUX9+C5bWEHOg8A+488HvZq5OkKKTQGWmfnqpRonfN3aoe
==> default: B9yn3KRdhKoA0qh0f9YZd2HKfUvRac+ihVMJ8JtmcMjp2wwjWQFiivtlsnEClEZL
==> default: DiVCnOs=
==> default: ---- END SSH2 PUBLIC KEY ----
==> default: '
==> default: Usage: grep [OPTION]... PATTERN [FILE]...
==> default: Try 'grep --help' for more information.
==> default: ---- BEGIN SSH2 PUBLIC KEY ---- Comment: "rsa-key-20161210" AAAAB3N
zaC1yc2EAAAABJQAAAgEApGtiFTeR7gu8htc13X0t1Ll1Ca5gVK6CWW2k rodjChuNBhotZoLeENkfcR
Ki6yKWWvG69vtAPd32uR9UdKyZHfiAJtNUBTQCU/UL 5nVSSkoxkocrE8G4p0rsY/hKjOv4aalFdkyie
g/w8UWAj8ZRpu54Utta0pZY7BEO C3/hUksIXxpbfNRCrvPKUNNbunO+b/5Mqe4rRzxSpwWW6FXd7B+s
qP3Y/Fqs6ZDn Dp7I79jd2hfmbzn0vP21Ha8RxMBn02N/EB4C8y4udXUV0hsoprJFcdV35J18tCmj 3R
B6mxznKSvck87R7NqYHdt8S2Kw4EJJC7UKi6kjG/OqQvuDX1Yg5z4jLzDrOnuV usb+CM7XOXRveNEbt
7Jxb6J0dzKL23V9NODyQpwgJwSDVY00iGsb3T69Sh3Dt7Xy wJ9SpNFOol9aDLQ7h3r7OiQ5fa1Ohcfu
d4Rib3ogQXDQuhhHtwjIBLKIPuutBjzY S/Un3/sf2VrzC3IIP179aO2TQ+Qj08RedpVc+WiCWhGQ5gD
ewnlj/ha2vv3tYlpG dNso6oRx/e3ByUNxvzkUX9+C5bWEHOg8A+488HvZq5OkKKTQGWmfnqpRonfN3a
oe B9yn3KRdhKoA0qh0f9YZd2HKfUvRac+ihVMJ8JtmcMjp2wwjWQFiivtlsnEClEZL DiVCnOs= ---
- END SSH2 PUBLIC KEY ----
==> default: Running provisioner: shell...
    default: Running: inline script
==> default: Running provisioner: shell...
    default: Running: C:/Users/UNBREA~1/AppData/Local/Temp/vagrant-shell20161214
-3956-99x66m.sh
==> default: Running provisioner: shell...
    default: Running: C:/Users/UNBREA~1/AppData/Local/Temp/vagrant-shell20161214
-3956-93ylub.sh
==> default: nginx stop/waiting
==> default: nginx start/running, process 1896
==> default: php5-fpm stop/waiting
==> default: php5-fpm start/running, process 1911
==> default: Running provisioner: shell...
    default: Running: C:/Users/UNBREA~1/AppData/Local/Temp/vagrant-shell20161214
-3956-16qeeog.sh
==> default: mysql:
==> default: [Warning] Using a password on the command line interface can be ins
ecure.
==> default: Please use --connect-expired-password option or invoke mysql in int
eractive mode.
The SSH command responded with a non-zero exit status. Vagrant
assumes that this means the command failed. The output for this command
should be in the log above. Please read the output to determine what
went wrong.

C:\Users\Unbreakable>

Изменено VasyaPupkin (14.12.2016 22:38:11)

VasyaPupkin

Сообщений: 19

Re: Не получается подключится к homestead по ssh

Раскопал в англо документации, что для доступа по ssh нужно прописать  хост vagrant@127.0.0.1 и пароль vagrant .
а я без пароля пытался зайти по ключу.
почему то на русских сайтах об этом ни слова.

Изменено VasyaPupkin (16.12.2016 17:07:17)